California Brazing Banner
Ionic Banner
Solar Manufacturing
Solar Atmospheres
UPC
Beavermatic Banner

Reply To: Furnace Ramp Rate During Vacuum Brazing

Home Forums Processes (Q&A) Brazing Furnace Ramp Rate During Vacuum Brazing Reply To: Furnace Ramp Rate During Vacuum Brazing

#1004 Reply

engine76
Member

The other issue to consider is energy and price. Heating a furnace at 30 degrees per minute is more expensive than 10 degrees per minute. Also hot zone life and vacuum levels are reduced by heating at the faster rates.

close
Facebook IconTwitter IconView LinkedIn PageView LinkedIn PageView LinkedIn Page
WEBSITE BY JENNIFER BURKHARDT